Technical support

+39 (0)424 1660208 support@ilevia.com

MQTT Integration with the Ilevia system

Guides for integrating Shelly and Nuki devices into the Ilevia system via the MQTT protocol.

On this page you will find guides for integrating into the Ilevia system devices that communicate via the MQTT protocol (Shelly and Nuki). We recommend starting with the initial configurations (MQTT gateway, topic and payload) and then moving on to the guide for the device to be integrated.

Information and configuration of devices compatible with the MQTT protocol in the Ilevia system:

Initial configurations:

Shelly devices

1st generation devices

Configuration of Shelly devices:

2nd generation devices

Configuration of Shelly devices:

Nuki devices

Configuration of Nuki devices

In this section

MQTT: how topics and payloads work What MQTT topics (Read, Response, Write, Event) and the payload are, and how scripts in Ilevia Manager process them for the different component types. MQTT fx software configuration How to set up the MQTT fx debug software to monitor and send messages on the Ilevia server broker topics. How Shelly devices work with MQTT Introduction to Shelly devices with MQTT protocol on the Ilevia system: concepts, configuration in Ilevia Manager and operation test. How to find the Shelly device ID How to find the device ID to complete the topics within the Ilevia manager configuration software. Create an MQTT gateway in Ilevia Manager How to create a gateway with MQTT broker protocol in the Ilevia Manager configuration software. Shelly Plug integration with the MQTT protocol How to configure Shelly Plug devices with the MQTT protocol and integrate them into the Ilevia system via Ilevia Manager. Shelly Flood Integration with MQTT in the Ilevia system How to configure the Shelly Flood sensor with the MQTT protocol in Ilevia Manager, with topic verification and the final result. Shelly Dimmer device integration with Ilevia How to connect a Shelly Dimmer device to the Ilevia system via MQTT and control switching on/off and brightness from Ilevia Manager. Integration of Shelly 4 Pro with MQTT in the Ilevia system How to connect Shelly 4 Pro to the Ilevia server via MQTT and display the watt consumption of a channel in Ilevia Manager. Integrating Shelly 1 / 1PM with MQTT in Ilevia How to configure Shelly 1 and 1PM devices with the MQTT protocol and connect them to the Ilevia X1 server via Ilevia Manager. Shelly 2.5 integration with MQTT in the Ilevia system How to configure Shelly 2.5 with the MQTT protocol in Ilevia Manager, both as two relays and as a shutter command with calibration. Shelly RGBW2 integration with Ilevia via MQTT How to configure the Shelly RGBW2 device via MQTT in Ilevia Manager to control RGB lights (colour changer) and white light. Integrating Shelly H&T with MQTT in the Ilevia system How to integrate the Shelly H&T sensor with the Ilevia server via MQTT to read temperature, humidity, and battery level. Integration of Shelly Door Window 2 with Ilevia via MQTT How to configure the Shelly Door Window 2 sensor via MQTT in Ilevia Manager: state, brightness, battery, tilt, temperature, and vibration. Shelly Duo Bulb with MQTT in the Ilevia system How to integrate the Shelly Duo Bulb into the Ilevia system via MQTT protocol: switching on, brightness, and white tone from Ilevia Manager. Integration of Shelly i3 with the MQTT protocol How to configure the Shelly i3 device via MQTT in Ilevia Manager to use up to 3 inputs, including with KNX actuators. How to integrate the Shelly TRV device with Ilevia How to integrate the Shelly TRV thermostatic valve with the Ilevia server via MQTT: web interface configuration and component setup in Ilevia Manager. Shelly Motion device integration with Ilevia How to integrate the Shelly Motion sensor with the Ilevia server via MQTT: device, gateway and component configuration in Ilevia Manager. Integrate Shelly Plus 1 with the Ilevia system How to configure the Shelly Plus 1 device with the MQTT protocol so it can be managed with the Ilevia system. Integration of Shelly Plus H&T with the Ilevia server How to configure the Shelly Plus H&T sensor (temperature, humidity, battery) via MQTT and connect it to Ilevia Manager with Info components. MQTT Gateway Properties MQTT gateway and MQTT 2 gateway properties in Ilevia Manager and component settings for communicating with IoT devices. Shelly Energy Meter Integration with MQTT in Ilevia How to configure the Shelly Energy Meter device via MQTT in the Ilevia system to monitor energy consumption. Integration of the Nuki smart lock via MQTT How to enable MQTT in the Nuki app and configure the gateway and components in Ilevia Manager to open, close, and monitor the Nuki smart lock.

Last updated: