Quick guide

Choose your server and follow the path from connection to the first project in Manager, up to the commands in ILEVIA Control.

This guide takes you step by step from installing the Ilevia server to creating the first project with Ilevia Manager, up to controlling the components from Ilevia Control.

Choose the guide for your server:

Ilevia X1 Plus: the recommended server for systems.
Ilevia X1: the previous generation server.
Ilevia X5 virtual machine: the Ilevia server without a dedicated physical device.
Raspberry Pi: for trials and testing only.

After connecting the server

To create the first command and interface, follow Getting started with ILEVIA Manager.
If you have an ETS project, you can follow the alternative path Import from ETS.
To find the devices and use the system commands, read Using ILEVIA Control from a smartphone.

In this section

TEST ON RASPBERRY PI SERVER Quick Guide: Ilevia X1 Plus From connecting the Ilevia X1 Plus server to the first project with Ilevia Manager and Ilevia Control. Quick Guide: Ilevia X1 Plus Connect the X1 Plus server, create a KNX command and its interface, upload the project, and verify the light with ILEVIA Control. Quick start: Ilevia X1 From installing the Ilevia X1 server to your first project with Ilevia Manager and Ilevia Control. Quick guide: Ilevia X5 virtual machine From installing the Ilevia X5 virtual machine to the first project with Ilevia Manager and Ilevia Control. Quick start: Raspberry Pi (testing only) From installing the Ilevia server on a Raspberry Pi (for trials and testing) to your first project with Ilevia Manager and Ilevia Control. Import from ETS Import a .knxproj file into ILEVIA Manager, load the sample JSON rules, and verify KNX components and addresses before use.

Last updated: 2026-11-09