Server X1: guides and downloads

Guide index for the Ilevia X1 server: specifications, wiring, connection, web panel, cloud, VPN, firmware and data sheet download.

In this section you will find the guides to wire, connect and configure the Ilevia X1 server, as well as documents to download.

Information and configuration:

Downloads

In this section

Connection to the X1 server from Ilevia Manager or direct How to connect the Ilevia X1 server to Ilevia Manager via local network or by direct connection to the PC, using a static IP address. X1 server specifications Ilevia X1 server technical sheet: dimensions, CPU, RAM, connections, and description of LEDs and connectors. X1 Plus server connections Overview of the Ilevia X1 Plus server connections: 24 V power supply, Ethernet, KNX bus, and two RS485 serial ports. Connection to the Ilevia server via cloud How to activate the cloud service on the X1 server and connect remotely with Ilevia Control and Ilevia Manager. X1 server firmware update Guide on how to set the server firmware for Ilevia X1 home automation control, and how to check that it has been updated correctly. Web configuration panel of the X1 server Web page settings of the server for Ilevia X1 home automation control. Installation and update of the Logic module How to install and update the Logic module (Ilevia Logic) on the Ilevia server from Ilevia Manager or from the web interface, and how to check its version and status. Resetting the X1 server network settings How to reset the X1 server IP address (static or DHCP) with a USB flash drive and the eve.settings.txt file. Direct connection of the X1 server to the PC How to connect the Ilevia X1 server directly to the PC with an Ethernet cable, without a router, by setting a static IP address on Windows. X1 SERVER VPN SETUP

Last updated: 2026-11-04