Web configuration panel of the X1 server

Connection and configuration

Step 1: Connection to the main page

Step 1: CONNECTION TO THE MAIN PAGE

Open the browser and enter the server IP address in the address bar. If you do not know your server’s IP, click this link: you will be taken directly to the main web configuration page. In the first panel on the left, you will find all the information regarding the network and license of your Ilevia server.

Troubleshooting:

– If the browser does not open the page, check the device connection and make sure it is on the same network.

– If you have moved the Ilevia X1 device outside the local network, you can search for its new IP address with an online network scanning software, such as IP scan. If you cannot find it, try restarting the device by disconnecting and reconnecting the power supply; if this still does not solve the problem, you will need to perform a format and factory reset: follow this guide for the complete procedure.

Step 2: Login

Once connected to the X1 server login page, enter your credentials in the appropriate section.

Note: the default password is “password”. In any case, we recommend changing it once the project is defined (see the “User organization” guide).

Step 3: Configuration panel

After login, you access the web configuration panel, from which you can reach all the configuration and diagnostic functions of the Ilevia server.

Step 4: Diagnostics Menu

By entering the Diagnostics menu and clicking the Start button, you can start the test procedure for diagnostics.

Step 5: Utility Menu

The Utility menu allows you to check whether firmware or Logic module updates are available and, if so, download and install them on the Ilevia server. It also allows you to restore the server database, start and stop Ilevia services, and restart the device.

Step 6: Settings Menu

In the Settings menu, you can change the administrator password, set the network configuration, the time zone and time, and change the Ilevia server name.

Step 7: Network configuration

Click the “Network” menu: this is the panel for changing or setting the Ilevia server IP address on your network. To set a static IP address, clear the “Use DHCP” checkbox and enter the desired IP address in the “IP address” text field. To save, click the “Apply changes” button. The server will request a restart and, after reboot, the settings will be applied.

Note: if you assign a static IP to the X1 server, make sure that the configured IP is not already assigned to another device on the local network to which the X1 server is connected.

Step 8: Time zone, date and time

These are the date and time settings. It is very important to set them correctly, because the server uses them for timers and for executing specific scenes.

In the NTP server section there is a list of default servers to which the Ilevia server connects to update the date and time. Remember to save the settings by clicking the “Apply changes” button: the system will restart to apply them.

Step 9: Cloud Connection Menu
This menu allows you to enable cloud connection on the Ilevia server. The Ilevia server Cloud connection avoids the need to configure port forwarding on the router. For more information on cloud connection, see this guide.

Step 10: General Menu

Enter the “General” menu: you will find a text field where you can enter the name by which the Ilevia server will be identified in the system. After changing the name, the server will require a restart to apply the change.