Raspberry Pi server firmware update

This guide explains how to check for and install Ilevia server firmware updates on Raspberry Pi from the web configuration interface.

Procedure

Follow the steps below:

Step 1: Power on the hardware unit;

Step 2: Connect the unit to the Ethernet connector;

Step 3: open a new browser tab and enter http://www.ilevia.com/evelocalip.php in the address bar;

The browser displays the list of IP addresses of all servers connected to the local network. If there is only one Ilevia server on the network, you are automatically redirected to the server web configuration interface. In the login panel you will find the most important server information, such as the firmware version, license status, public IP address, and MAC address.

Step 4:

Enter your credentials in the appropriate text fields (default credentials: username admin / password password). Once logged in, the Ilevia server configuration and control menus are displayed.

Step 5:

Open the Utility menu and click Check now to search for firmware updates online.

Step 6:

If a new firmware version is available, click Update.

Step 7:

Wait a couple of minutes for the system to restart, then log in using your credentials.

If the system is already updated to the latest available firmware version, a message is displayed.

Congratulations! Your system is now updated to the latest version.