Sony TV integration
Control a Sony TV from the Ilevia server with the protocol and the TV SONY component.
Introduction
The TV SONY protocol works together with the TV SONY component, available in the Software Components section, and allows commands to be sent to control a Sony TV with the Ilevia server.
What you need
A Sony TV connected to the same network as the Ilevia server.
Remote network control enabled in the TV network settings.
Configuration in Ilevia Manager
Open the Gateways section and create a new gateway (see Add and remove a gateway).
Enter a title that identifies the gateway.
Select TV SONY from the protocol drop-down menu.
Enable the gateway by checking Enable.
Enter the TV IP address.
Add the TV SONY component to the interface and connect it to the gateway.
The parameters can be changed at any time; after making changes, save the project and send it to the server.
For an overview of all protocols, see Supported gateways and protocols.
Tips
Assign the TV a static IP address (or a DHCP reservation in the router).
For LG TVs, see LG TV integration.