Cloud connection of the Ilevia X1 Plus server

Introduction

This guide explains how to activate and use the Ilevia Cloud connection for the Ilevia server. Ilevia Cloud allows both remote and local connection without the need to configure any port forwarding on the router to which the server is connected.

Configuration procedure

Step 1:

Open the browser and enter the local IP address of your Ilevia server.

Step 2:

Log in to the Ilevia server web interface.

Step 3:

Go to the Settings menu, then go to the Cloud menu.

Step 4:

To use the Cloud feature, you must accept the Disclaimer displayed after entering the Cloud menu. The Cloud menu includes 3 check boxes, disabled by default. The first check box, if enabled, activates the Ilevia Cloud connection service on the server. The second check box, if enabled, activates the Ilevia Cloud port required to allow technical support. The third check box determines whether the VPN connection is enabled or not.

Conclusion

It is important to know that, once the Ilevia Cloud connection check box has been enabled on the Ilevia server, the related port must be enabled by contacting Ilevia technical support via the dedicated number (+39 0424 1660208) or by sending an email, specifying the Cloud port in the message, to the following address: supporto@ilevia.com.

Cloud connection with Ilevia Manager

Step 5:

Open Ilevia Manager. Go to the Project menu and click Connect.

Step 6:

1. Replace the current server IP address with the following text: ilevia.com. In the Port text field, enter the Cloud port. 2. Finally, click OK.

Conclusion

By connecting to the server via Cloud with Ilevia Manager, you will be able to customize, upload, and download the project remotely.